[W5SFA] FT 991 - C4FM and Digital IDs and EchoLink

[John Gervais]

Thanks Dennis but I don’t have a 991A - just a 991.

Thanks,
John Gervais
(979) 270-0869

> On Oct 10, 2018, at 9:26 AM, Roger W Klein <rwklein at katyweb.net> wrote:
> 
> Well, first - I categorically reject any reference to being a "guru"!  But in 10 or 20 years I might achieve "geezer" status...
> 
> Echolink would be a nice capability to have.  I will have to do some research to see how doable it is.  It may be possible to add it via our RC210 analog controller, if there is an open port.
> 
> Another possibility (as an alternative to Echolink) would be to set up a Wires-X interface to one of the Yaesu repeaters over the air. This would require a dedicated radio (such as an FTM-400) and an HRI-200 interface box to connect to the internet.
> 
> I'd like to hear from club members if they are interested in this kind of capability (remote access to our repeaters through the internet).
> 
> BTW, the Bellville repeaters are now linked digitally using a Digital Group ID of 10.  We will be adding the Columbus repeater hopefully in the next few weeks, as San Benard Electric is waiting for equipment to arrive.
> 
> 73,
> 
> Roger N5RWK
> 
> On October 10, 2018, at 6:55 AM, Dennis Email <dhcody at att.net> wrote:
> 
> John, 
> 
>     If you have a 991(A) see attachment, excerpt from the manual on page 99 on setting up DG-ID.   Hope this helps.
> 
> Echo link is not an easy plug and play with all the linking we have between our repeaters, just my 2 cents worth but Roger is the guru on that. 
> 
> 
> Hope this helps.... 73   WR5DC
> 
> Dennis H. Cody 
> dhcody at att.net
> 281-844-0985
> 
> 
> 
> 
> 
> 
> 
> 
> 
> -----Original Message-----
> From: w5sfa [mailto:w5sfa-bounces at w5sfa.org] On Behalf Of John Gervais
> Sent: Wednesday, October 10, 2018 6:11 AM
> To: w5sfa at w5sfa.org
> Subject: [W5SFA] FT 991 - C4FM and Digital IDs and EchoLink
> 
> Can anybody explain how to set up my FT 991 with DG ID10? Somehow I set it up for DGID 40 but can’t figure out how to edit or add a new ID 10. I’ve seen some YouTube’s but it shows the FT991A and using WiresX. It tried some semblance of that to no avail. So far I’ve confirmed I am in C4FM and in digital and I have a DG ID 40 in there. 
> 
> Also I’ve been communicating with some buddies that use VHF/UHF only via the EchoLink software. In my personal opinion only EchoLink is kind of hamish but it’s the best that I know of to make contact with those not on HF. Also when I’m out of range I’d like to check into our Tuesday nets (when I remember) by accessing some local repeater. Would it be too much trouble to add our repeaters to the EchoLink system? Is there a better alternative? 
> 
> 73
> John KG5NCL 
> 
> 
> 
> _______________________________________________
> w5sfa mailing list
> w5sfa at w5sfa.org
> http://mail.w5sfa.org/mailman/listinfo/w5sfa_w5sfa.org
> _______________________________________________
> w5sfa mailing list
> w5sfa at w5sfa.org
> http://mail.w5sfa.org/mailman/listinfo/w5sfa_w5sfa.org